Maxitrol RV53 Gas Regulator 1" NPT

Maxitrol Model RV53, 1" NPT, without Vent Relief, is a straight-thru-flow (STF) design regulator. Maxitrol’s RV Series straight-thru-flow (STF) design regulators are non-lockup type regulators for high capacities at low inlet pressures. The Maxitrol RV series straight-thru cone principal permits gas to flow straight through the regulator without changing directions. Frictional flow resistance is reduced, resulting in greater capacity. An improved flow pattern provides accurate, sensitive regulation at extremely low pressure differentials. Typical applications include residential, commercial, and industrial gas-fired appliances and equipment used on low or medium pressure gas supplies.

When sizing a regulator the following must be known:Gas Type, Available Inlet Pressure, Desired Outlet Pressure, Zero Governor Application (indicated by model number ending in “Z”), will the regulator control main burner and pilot load OR main burner only?, required minimum and maximum flow rate in cfh or m3/h or Btu/h, and Pipe Size.

.Ask us to help you size the regulator that you need for your specific applications. We can also assist in changing your Maxitrol spring, in the regulator, to match your application needs.

Suitable for natural, manufactured, mixed gases, liquefied petroleum gases, LP gas-air mixtures, and gases of DIN EN 437 gas family 1, 2, and 3.