Siemens SKP25.012U2 Gas Actuator

The Siemens SKP25.012U2 controls the burner manifold gas pressure according to a fixed setpoint. Siemens SKP25.012U2 can also be applied as a 1:1 air/gas proportionator or zero governor.

The SKP25.012U2 electro‐hydraulic actuator is used in combination with VGxxx.xxxU gas valve bodies to provide slow opening, fast closing safety shut‐off and, depending on model gas pressure regulation and air/gas ratio control for industrial and commercial burner applications. Since safety shut‐off, constant pressure regulation or air/gas ratio control can be performed by a single valve, fewer gas train components and fittings are required to assemble a gas train. This significantly reduces both the size and weight of the gas train. The total pressure drop across the gas train arrangement is reduced, allowing for the use of smaller diameter gas trains in most applications.

The compact SKP25.012U2 actuator opens slowly when powered and closes immediately upon power interruption. The modular design allows the SKP25.012U2 to be used in combination with all VGxxx.xxxU gas valves bodies from ½" to 6" sizes. The actuator can easily be mounted on the square flange of any VGxxx.xxxU valve with four pre‐mounted screws. No gaskets or seals are required when mounting the actuator. A visible position indicator on the front of the actuator displays the entire stroke of the valve. A light indicates when the actuator is powered.

All SKPx5.xxxUx electro‐hydraulic actuators combine with VGxxx.xxxU gas valves to provide safety shut‐off control for industrial and commercial burner applications.